| Reader Communication Protocol Developer's Guide |
|
Getting Commands
The Get commands listed in the following table are used to get parameters, options and working state from the reader.
Overview of Getting Commands
| Command | Command Code | Description |
|---|---|---|
| Get Antenna Ports | 0x61 | Get the configuration of the antenna ports for tag access or inventory operation and tx power, etc. |
| Get Current Tag Protocol | 0x63 | Get the tag protocol configured for tag operations. |
| Get Frequency Hopping | 0x65 | Get the frequency hopping table and regulatory frequency hopping time |
| Get GPI | 0x66 | Get the status of Gpi pins |
| Get Current Region | 0x67 | Get the current region of reader |
| Get Available Regions | 0x71 | Get the available Regions supported by reader |
| Get Reader Configuration | 0x6A | Get configuration options of reader. |
| Get Protocol Configuration | 0x6B | Get protocol-specific configuration parameters |
| Get Current Temperature | 0x72 | Get the current temperature of reader |